BDMSD - SCOTCH-SEAL BRAND INDUSTRIAL SEALANT 612
- MSDS: BDMSD
- Manufacturer: 3M COMPANY ADHESIVES COATINGS AND SEALERS
- Product Name: SCOTCH-SEAL BRAND INDUSTRIAL SEALANT 612
- National Stock Number: 8030-00-242-3194
Product Identification
Product ID:SCOTCH-SEAL BRAND INDUSTRIAL SEALANT 612
MSDS Date:03/09/1987
FSC:8030
NIIN:00-242-3194
MSDS Number: BDMSD
Responsible Party
ST. PAUL, MN 55144-1000
Emergency Phone: (612)733-1110
Info Phone: (612)733-1110
Cage: 04963
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 30-40%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 1-10%
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
THIAZOLE PEPTIZING AGENT
Fraction By Weight: 1-10%
OSHA PEL N/K
ACGIH TLV: N/K
POLYSULFIDE RUBBER
Fraction By Weight: 50-60%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY CAUSE IRRITATION ON DIRECT
CONTACT. SKIN:MAY CAUSE IRRITATION. INHALATION:NO ADVERSE HEALTH
EFFECTS ARE EXPECTED. INGESTION:MAY CAUSE DIGESTIVE SYSTEM
IRRITATION.
Explanation of Carcinogenicity:NOT APPLICABLE
Effects of Overexposure:SEE HEALTH HAZARD DATA .
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:EYE:IMME FLUSH W/LGE AMTS OF WTR FOR AT LEAST 15 MIN .CALL A
PHYSICIAN. SKIN:WASH AFFECTED AREA W/SOAP & WTR. INHALATION:REMOVE
FROM EXPOSURE. SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION)
.INGESTION:CALL MD IMMEDIATELY
Fire Fighting
Lower Limits:N/APPLICABLE
Upper Limits:N/APPLICABLE
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:NOT APPLICABLE (SOLID)
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:AVOID EYE & PRLONGD SKIN CONTACT,WEAR
SAFETY GLASSES & IMPERVIOUS GLOVES WHN HNDLNG PRODUCT.DO NOT TAKE
INTERNALLY.KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID EYE & PROLONGED SKIN CONTACT.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:MECH NICAL VENTILATION RECOMMENDED, TO KEEP BELOW TLV
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:N/K
Work Hygienic Practices:N/K
Supplemental Safety and Health
RTE ENTRY:
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/APPLICAB
Vapor Density:N/APPLICAB
Spec Gravity:1.46
pH:N/APPL
Solubility in Water:VERY SLIGHT
Appearance and Odor:BLACK PUTTY, STRONG SULFIDE ODOR
Percent Volatiles by Volume:0
Corrosion Rate:
Stability
Stability Indicator/Materials to Avoid:YES
N/APPLICABLE.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CO, CO*2, SO*2, SMOKE PARTICLES WHEN
EXPOS TO HEART OR FLAME
Disposal
Waste Disposal Methods:NOT A HAZARDOUS WASTE (E.P.A.). MAY BE PLACED IN
A SANITARY LANDFILL IF LOCAL REGULATIONS PERMIT. DISPOSE OF IN
ACCORDANCE W/LOCAL,STATE & FEDERAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.